| This Lind Rugged DC/DC Adapter meets the most common MIL-Standards, usually required in many military applications, as well as other industrial environments. |
| SPECIFICATIONS | | | | | | DC Input Characteristics; | | | Input | 11 to 32 VDC | | EMI/RFI Characteristics: | meets MIL-STD461E, | | | CE102, CS101, CS114, CS115, | | | CS116, RE102, RS101, RS103 | | Input transient Protection: | meets MIL-STD-1275B, | | | Voltage Surge +100 VDC, | | | Voltage Spike +/-250 VDC | | Low Input Voltage Shutdown: | Auto Recovery | | High Input Voltage Shutdown: | Auto Recovery | | Load Dump Protection: | meets ISO 7637 | | Reverse Polarity: | Auto Recovery | | | | | DC Output Characteristics; | | | Short Circuit Protection: | Auto Recovery | | Isolation Voltage: | Input to Output nonisolated, 100 VDC output to case | | Noise and Ripple: | meets MIL-STD-1275D and MIL-STD461E CE102
| | | | | Physical and Environmental Specifications; | | | Operating Temperature: | -40 to +60 DegC | | Storage Temperature: | -40 to +80 DegC | | High Temperature: | meets MIL-STD-810F, method 501.4 | | Low Temperature: | meets MIL-STD-810F, method 502.4 | | Temperature Shock: | meets MIL-STD-810F, method 503.4 | | Shock: | meets MIL-STD-810F, method 516.5, proc. I | | Acceleration: | meets MIL-STD-810F, method 513.5, proc. I, Helicopters | | Vibration: | meets MIL-STD-810F, method 514.5, proc. I, Category 20 Ground Vehicles
Humidity: meets MIL-STD-810F, method 507.4 | | Salt and Fog: | meets MIL-STD-810F, method 509.4 | | Sand and Dust: | meets MIL-STD-810F, method 510.4 | | Enclosure: | | | Finish: | Black anodized | | Weight: | 32 oz | | Dimensions: | 9.3 x 3.0 x 1.3 in | | | | | Cables; | | Input cable: 72 inch, hardwired to bare wire | | Output cable: 72inch, hardwired to DC connector | |
Rugged DC/DC power adapter (MIL SPEC)
