General Dynamics Itronix MR-1 Power Adapter (MIL SPEC) has been added to your quote list
Home >> General Dynamics Itronix DC/DC >> General Dynamics Itronix MR-1 Power Adapter (MIL SPEC)
General Dynamics Itronix MR-1 Power Adapter (MIL SPEC)

General Dynamics Itronix MR-1 Power Adapter (MIL SPEC)Rugged DC/DC Power Adapter 11 to 32 VDC

11 to 32 VDC

meets MIL-STD461E

meets MIL-STD-1275D

Auto Recovery

Description

This Lind Rugged DC/DC Adapter meets the most common MIL-Standards, usually required in many military applications, as well as other industrial environments.

 

TECHNICAL INFORMATION  
   
DC Input Characteristics;  
Input 11 to 32 VDC
EMI/RFI Characteristics: meets MIL-STD461E,
CE102, CS101, CS114, CS115,
CS116, RE102, RS101, RS103
Input transient Protection: meets MIL-STD-1275D,
Voltage Surge +100 VDC,
Voltage Spike +/-250 VDC
Low Input Voltage Shutdown: Auto Recovery
High Input Voltage Shutdown: Auto Recovery
Load Dump Protection: meets ISO 7637
Reverse Polarity: Auto Recovery
DC OUTPUT CHARACTERISTICS;  
Short Circuit Protection: Auto Recovery
Isolation Voltage: Input to Output nonisolated, 100 VDC output to case
Noise and Ripple: meets MIL-STD-1275D and MIL-STD461E CE102

 

PHYSICAL AND ENVIRONMENTAL SPECIFICATIONS;  
   
Operating Temperature: -40 to +60 DegC
Storage Temperature: -40 to +80 DegC
High Temperature:  meets MIL-STD-810F, method 501.4
Low Temperature: meets MIL-STD-810F, method 502.4
Temperature Shock: meets MIL-STD-810F, method 503.4
Shock: meets MIL-STD-810F, method 516.5, proc. I
Acceleration: meets MIL-STD-810F, method 513.5, proc. I, Helicopters
Vibration: meets MIL-STD-810F, method 514.5, proc. I, Category 20 Ground Vehicles
Humidity: meets MIL-STD-810F, method 507.4
Salt and Fog: meets MIL-STD-810F, method 509.4
Sand and Dust: meets MIL-STD-810F, method 510.4
Enclosure:  Extruded Aluminum
Finish: Black anodized
Weight: 32 oz
Dimensions: 9.3 x 3.0 x 1.3 in